Berita terbaru untuk lagu | tangga lagu | rilis lagu | Lirik Lagu | Arti Lagu, dll yang diupdate terus dan selalu terbaru

Friday, 16 May 2008

Can HTC's touchscreen Diamond outshine the iPhone?


Just unveiled at a lavish event in London, HTC—maker of the sleek Touch for Sprint—has a new touchscreen gem on its hands, although the aptly-named Touch Diamond arrives in the rough that we call Windows Mobile.
But before I get all grumpy about Microsoft's tricky mobile OS, let's behold the Diamond's sparkling design and touch UI—and from this standpoint, there's a lot to like.

First off, the Diamond comes in a sleek, and relatively light (according to the specs, at least) jet-black shell. Measuring 4 by 2 by 0.45 inches, the Diamond is a little shorter, narrower, and a hair thinner than the iPhone, and at 3.9 ounces, it's almost a full ounce lighter.

Then there's the touchscreen: 2.8 inches diagonally and at full VGA resolution, easily beating the iPhone's 480 by 320-pixel resolution. Whether one can appreciate VGA resolution on a 2.8-inch screen is an open question, although initial reports indicate that the Diamond's display is, indeed, dazzling.

And that brings us to the Diamond's TouchFlo interface—a sleek, easy-to-use touch UI that runs on top of Windows Mobile.

On the Touch for Sprint, TouchFlo looked like a 3D cube that you spun around with your finger. On the Diamond, TouchFlo boasts a row of icons at the bottom of the screen (for functions such as messaging, music, weather, photos, and Web browsing)—tap an icon, and the display spins and twirls to the appropriate application. Nice.

The Diamond also looks good in the spec department: HSDPA for 3.5G Web browsing and downloads, Wi-Fi, Bluetooth, GPS, 4GB of internal memory, a 3.2MP camera, and an accelerometer that turns the display to landscape mode when you turn the Diamond on its side.

For Web browsing, you get Opera for full HTML rendering and zooming in to Web pages, along with a separate YouTube app.

All very enticing, but lurking underneath it all is the professional version of Windows Mobile—and undeniably powerful OS, but tough to use when you're out and about. Indeed, with its intricate menus, the pro version of Windows Mobile is almost impossible to use without a stylus, so let's hope the Diamond has one
Still, Windows Mobile Professional (the new version 6.1) means full compatibility with corporate Exchange servers, along with Microsoft's mobile Office suite (good for composing and editing Word, Excel, and PowerPoint documents).

So, can the Diamond take on the iPhone? On paper, it certainly wins out thanks to its HSDPA and GPS abilities (although the upcoming 3G iPhone will probably draw even come June). And I like the size and weight of the Diamond, plus the sheer capabilities of Windows Mobile (the iPhone has yet to get a true office suite).

But while the TouchFlo interface looks like a pleasure to use, Windows Mobile itself is a bear without a stylus—and with all its tweakable features and options, it's a tough nut to crack for a novice.

In any event, I'll hold off on any final judgments until I see one in person—which may not be for awhile. The Diamond is set to arrive next month in Europe and Asia, but it won't land here in the U.S. until the second half of the year. No word on pricing yet.

So, what do you think? Is the Diamond looking like an iPhone killer? Fire away!

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:51 pm

Can HTC's touchscreen Diamond outshine the iPhone?


Just unveiled at a lavish event in London, HTC—maker of the sleek Touch for Sprint—has a new touchscreen gem on its hands, although the aptly-named Touch Diamond arrives in the rough that we call Windows Mobile.
But before I get all grumpy about Microsoft's tricky mobile OS, let's behold the Diamond's sparkling design and touch UI—and from this standpoint, there's a lot to like.

First off, the Diamond comes in a sleek, and relatively light (according to the specs, at least) jet-black shell. Measuring 4 by 2 by 0.45 inches, the Diamond is a little shorter, narrower, and a hair thinner than the iPhone, and at 3.9 ounces, it's almost a full ounce lighter.

Then there's the touchscreen: 2.8 inches diagonally and at full VGA resolution, easily beating the iPhone's 480 by 320-pixel resolution. Whether one can appreciate VGA resolution on a 2.8-inch screen is an open question, although initial reports indicate that the Diamond's display is, indeed, dazzling.

And that brings us to the Diamond's TouchFlo interface—a sleek, easy-to-use touch UI that runs on top of Windows Mobile.

On the Touch for Sprint, TouchFlo looked like a 3D cube that you spun around with your finger. On the Diamond, TouchFlo boasts a row of icons at the bottom of the screen (for functions such as messaging, music, weather, photos, and Web browsing)—tap an icon, and the display spins and twirls to the appropriate application. Nice.

The Diamond also looks good in the spec department: HSDPA for 3.5G Web browsing and downloads, Wi-Fi, Bluetooth, GPS, 4GB of internal memory, a 3.2MP camera, and an accelerometer that turns the display to landscape mode when you turn the Diamond on its side.

For Web browsing, you get Opera for full HTML rendering and zooming in to Web pages, along with a separate YouTube app.

All very enticing, but lurking underneath it all is the professional version of Windows Mobile—and undeniably powerful OS, but tough to use when you're out and about. Indeed, with its intricate menus, the pro version of Windows Mobile is almost impossible to use without a stylus, so let's hope the Diamond has one
Still, Windows Mobile Professional (the new version 6.1) means full compatibility with corporate Exchange servers, along with Microsoft's mobile Office suite (good for composing and editing Word, Excel, and PowerPoint documents).

So, can the Diamond take on the iPhone? On paper, it certainly wins out thanks to its HSDPA and GPS abilities (although the upcoming 3G iPhone will probably draw even come June). And I like the size and weight of the Diamond, plus the sheer capabilities of Windows Mobile (the iPhone has yet to get a true office suite).

But while the TouchFlo interface looks like a pleasure to use, Windows Mobile itself is a bear without a stylus—and with all its tweakable features and options, it's a tough nut to crack for a novice.

In any event, I'll hold off on any final judgments until I see one in person—which may not be for awhile. The Diamond is set to arrive next month in Europe and Asia, but it won't land here in the U.S. until the second half of the year. No word on pricing yet.

So, what do you think? Is the Diamond looking like an iPhone killer? Fire away!

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:51 pm

Basic Cell Phone Acronyms You Need to Know


Confused by the alphabet soup of cell phone acronyms? I don't blame you. Here's a cheat sheet that'll help you navigate the waters while your shopping for your next phone—or trying to get the most out of the handset you've got.
Most of the confusion arises when it comes to the various types of cell phone networks. For example, when I ask my aunts and uncles which networks their phones work on, they'll usually tell me their carrier instead of whether they're using GSM or CDMA—and frankly, before I started writing about cell phones for a living, I didn't know the difference, either. So first, let's start with a quick overview of the two main standard for cell networks:

* GSM: Short for Global System for Mobile Communications, GSM is the most widespread standard for cell phones networks in the world. If you're a jetsetter who likes keeping in touch during your far-flung travels, you should go with a GSM-enabled phone, and here in the U.S., AT&T and T-Mobile are both GSM carriers. Besides the technical differences between CDMA and GSM networks (I'll spare you the details), the main distinction of a GSM phone is that it comes with a SIM (Subscriber Identity Module) card—a little plastic chip that, as its name implies, identifies your phone on the GSM network. If you take the SIM card out of your GSM phone and put it into another GSM handset, you'll be able to place and receive calls on the second phone using your own cell phone number. GSM phones are also capable of handling six-way conference calls.
* CDMA: Short for Code Division Multiple Access, CDMA networks are much more prevalent in the U.S. than they are abroad, and while CDMA boasts many of the same features as GSM networks (including caller ID, call waiting, and text messaging), there are some key differences—namely, CDMA phones don't use SIM cards. Instead, your phone's identity and number are programmed into the handset by your carrier, and you can't easily switch numbers on CDMA phones as you can with SIM-equipped GSM phones. Also, CDMA phones can only handle three-way conference calls, versus six-way calls on GSM networks. Major CDMA carriers in the U.S. include Sprint, Verizon Wireless, and regional operator Alltel.

OK, so you've got your two main flavors of networks, but now I'm going to stir another variable into the mix: 3G. Here's the deal: GSM and CDMA are both considered second-generation, or 2G, networks (the first generation being AMPS, an analog network used mainly back in the 1980s). Unlike the old voice-only AMPS networks, digital GSM and CDMA networks can handle both voice and data calls, which means you can send text messages, surf the Web and get caller ID info. But data flows slowly over GSM and CDMA—think dial-up, only slower. Streaming video and music? Forget it.

That's where 3G, or third-generation networks, come in. These so-called 3G systems allow data to flow at speeds you'd expect from a home DSL modem or better—and at those speeds, you get features like streaming video and full-track music downloads. The main types of 3G networks include:

* EV-DO: An add-on for CDMA networks, EV-DO (or Evolution-Data Optimized) delivers data speeds between 144Kbps to 2Mbps to CDMA cell phones, perfect for streaming video and music. Sprint offers EV-DO access through its Power Vision phones (which are typically a little pricier than standard models); on Verizon Wireless, look for the "V Cast" label.
* UMTS and HSDPA: Both UMTS (Universal Mobile Telecommunications System) and HSDPA (High-Speed Downlink Packet Access) are upgrades to GSM networks, and like EV-DO, they provide DSL and cable-like data speed. The only difference between UMTS and HSDPA (besides the technical nitty-gritty, of course) is that HSDPA is even faster than UMTS; for that reason, HSDPA networks are often called 3.5G rather than just 3G. In the U.S., only AT&T offers UMTS and HSDPA networks. (T-Mobile is busy working on its own HSDPA network, which should begin going online by the end of the year.)


Somewhere between 3G and 2G lies, naturally enough, 2.5G networks, which give you data speeds that are slightly faster than dial-up—no good for streaming video, but fine for messaging or mobile Web browsing. These networks include:

* 1xRTT: A variant of the CDMA standard, 1xRTT (or "1 times Radio Transmission Technology") gives you data speeds between 30Kbps and 90Kbps, a bit better than your typical 56Kbps dial-up modem. Most of the non-3G phones on Sprint and Verizon have 1xRTT capabilities.
* GPRS and EDGE: The 2.5G flavors of GSM networks, GPRS (General Packet Radio Service) and EDGE (Enhanced Data Rates for GSM Evolution) also give you data in the 30Kbps to 90Kbps range, with EDGE running slightly faster than GPRS. Again, most of the non-3G phones on AT&T offer either GPRS or EDGE, while T-Mobile—which has yet to launch a 3G network—only does GPRS and EDGE.


Whew! That's a lot of terminology, I know—and believe it or not, I've barely scratched the surface. I'll tackle more wireless acronyms in future posts; in the meantime, if you're curious about the technical details of the various cell networks, I'd suggest combing through Wikipedia, or check out Phonescoop's exhaustive glossary.

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:38 pm

Basic Cell Phone Acronyms You Need to Know


Confused by the alphabet soup of cell phone acronyms? I don't blame you. Here's a cheat sheet that'll help you navigate the waters while your shopping for your next phone—or trying to get the most out of the handset you've got.
Most of the confusion arises when it comes to the various types of cell phone networks. For example, when I ask my aunts and uncles which networks their phones work on, they'll usually tell me their carrier instead of whether they're using GSM or CDMA—and frankly, before I started writing about cell phones for a living, I didn't know the difference, either. So first, let's start with a quick overview of the two main standard for cell networks:

* GSM: Short for Global System for Mobile Communications, GSM is the most widespread standard for cell phones networks in the world. If you're a jetsetter who likes keeping in touch during your far-flung travels, you should go with a GSM-enabled phone, and here in the U.S., AT&T and T-Mobile are both GSM carriers. Besides the technical differences between CDMA and GSM networks (I'll spare you the details), the main distinction of a GSM phone is that it comes with a SIM (Subscriber Identity Module) card—a little plastic chip that, as its name implies, identifies your phone on the GSM network. If you take the SIM card out of your GSM phone and put it into another GSM handset, you'll be able to place and receive calls on the second phone using your own cell phone number. GSM phones are also capable of handling six-way conference calls.
* CDMA: Short for Code Division Multiple Access, CDMA networks are much more prevalent in the U.S. than they are abroad, and while CDMA boasts many of the same features as GSM networks (including caller ID, call waiting, and text messaging), there are some key differences—namely, CDMA phones don't use SIM cards. Instead, your phone's identity and number are programmed into the handset by your carrier, and you can't easily switch numbers on CDMA phones as you can with SIM-equipped GSM phones. Also, CDMA phones can only handle three-way conference calls, versus six-way calls on GSM networks. Major CDMA carriers in the U.S. include Sprint, Verizon Wireless, and regional operator Alltel.

OK, so you've got your two main flavors of networks, but now I'm going to stir another variable into the mix: 3G. Here's the deal: GSM and CDMA are both considered second-generation, or 2G, networks (the first generation being AMPS, an analog network used mainly back in the 1980s). Unlike the old voice-only AMPS networks, digital GSM and CDMA networks can handle both voice and data calls, which means you can send text messages, surf the Web and get caller ID info. But data flows slowly over GSM and CDMA—think dial-up, only slower. Streaming video and music? Forget it.

That's where 3G, or third-generation networks, come in. These so-called 3G systems allow data to flow at speeds you'd expect from a home DSL modem or better—and at those speeds, you get features like streaming video and full-track music downloads. The main types of 3G networks include:

* EV-DO: An add-on for CDMA networks, EV-DO (or Evolution-Data Optimized) delivers data speeds between 144Kbps to 2Mbps to CDMA cell phones, perfect for streaming video and music. Sprint offers EV-DO access through its Power Vision phones (which are typically a little pricier than standard models); on Verizon Wireless, look for the "V Cast" label.
* UMTS and HSDPA: Both UMTS (Universal Mobile Telecommunications System) and HSDPA (High-Speed Downlink Packet Access) are upgrades to GSM networks, and like EV-DO, they provide DSL and cable-like data speed. The only difference between UMTS and HSDPA (besides the technical nitty-gritty, of course) is that HSDPA is even faster than UMTS; for that reason, HSDPA networks are often called 3.5G rather than just 3G. In the U.S., only AT&T offers UMTS and HSDPA networks. (T-Mobile is busy working on its own HSDPA network, which should begin going online by the end of the year.)


Somewhere between 3G and 2G lies, naturally enough, 2.5G networks, which give you data speeds that are slightly faster than dial-up—no good for streaming video, but fine for messaging or mobile Web browsing. These networks include:

* 1xRTT: A variant of the CDMA standard, 1xRTT (or "1 times Radio Transmission Technology") gives you data speeds between 30Kbps and 90Kbps, a bit better than your typical 56Kbps dial-up modem. Most of the non-3G phones on Sprint and Verizon have 1xRTT capabilities.
* GPRS and EDGE: The 2.5G flavors of GSM networks, GPRS (General Packet Radio Service) and EDGE (Enhanced Data Rates for GSM Evolution) also give you data in the 30Kbps to 90Kbps range, with EDGE running slightly faster than GPRS. Again, most of the non-3G phones on AT&T offer either GPRS or EDGE, while T-Mobile—which has yet to launch a 3G network—only does GPRS and EDGE.


Whew! That's a lot of terminology, I know—and believe it or not, I've barely scratched the surface. I'll tackle more wireless acronyms in future posts; in the meantime, if you're curious about the technical details of the various cell networks, I'd suggest combing through Wikipedia, or check out Phonescoop's exhaustive glossary.

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:38 pm

Sunday, 11 May 2008

Update Blog

waduh baru sempet nich update blog saya, diaantaranya :
  1. rajasaads
  2. world technology
  3. sofware free all
  4. hot news weekly
Untuk isi dari update blog tersebut kunjungi sendiri ya blog nya..
Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:36 am

Listening to MP3 Files in Your Car

You can play MP3 files from your home stereo, from your computer, and from a portable player using headphones. But MP3 is still a relative newcomer in the world of car audio.

If your car's audio system doesn't recognize MP3 music discs, consider these less expensive workarounds:

* Use a cassette player adapter. If your car has a cassette player, check out a CD-to-Cassette Player adapter. It looks like a cassette tape with a stereo cable hanging from one end. Plug the cable into your portable MP3 player's headphone jack, insert the cassette, and start listening to your MP3s through your car stereo. It sounds amazingly good - well, at least compared to the road noise.

* Use a wireless FM adapter. Plug the cable from an FM transmitter into your portable MP3 player. Then tune your car's FM radio to the right frequency and listen to your MP3s. Unfortunately, sound quality varies because of local interference, and you're dependent on the batteries that power your wireless adapter.

*

* Buy a car stereo with a CD Input jack. Some car stereos lack a CD player. Instead, they have a CD Input jack. Plug a 1/8-inch stereo cable between this jack and your portable MP3 player to hear MP3s through your car's stereo system.

* Burn MP3 songs onto a CD in audio format. Does your car have a CD player? Then convert your MP3 songs back into standard CD audio format and copy them to a CD. You can't fit more than a dozen onto the CD, but at least you can hear them.

* Connect a portable MP3 player to amplified speakers. Take some amplified speakers - like the ones that come with your PC - and plug a portable MP3 player into them. Carry it all to your car and start listening. To change songs, just swap new cards in and out of the portable player.



Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:31 am

Listening to MP3 Files in Your Car

You can play MP3 files from your home stereo, from your computer, and from a portable player using headphones. But MP3 is still a relative newcomer in the world of car audio.

If your car's audio system doesn't recognize MP3 music discs, consider these less expensive workarounds:

* Use a cassette player adapter. If your car has a cassette player, check out a CD-to-Cassette Player adapter. It looks like a cassette tape with a stereo cable hanging from one end. Plug the cable into your portable MP3 player's headphone jack, insert the cassette, and start listening to your MP3s through your car stereo. It sounds amazingly good - well, at least compared to the road noise.

* Use a wireless FM adapter. Plug the cable from an FM transmitter into your portable MP3 player. Then tune your car's FM radio to the right frequency and listen to your MP3s. Unfortunately, sound quality varies because of local interference, and you're dependent on the batteries that power your wireless adapter.

*

* Buy a car stereo with a CD Input jack. Some car stereos lack a CD player. Instead, they have a CD Input jack. Plug a 1/8-inch stereo cable between this jack and your portable MP3 player to hear MP3s through your car's stereo system.

* Burn MP3 songs onto a CD in audio format. Does your car have a CD player? Then convert your MP3 songs back into standard CD audio format and copy them to a CD. You can't fit more than a dozen onto the CD, but at least you can hear them.

* Connect a portable MP3 player to amplified speakers. Take some amplified speakers - like the ones that come with your PC - and plug a portable MP3 player into them. Carry it all to your car and start listening. To change songs, just swap new cards in and out of the portable player.



Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:31 am

Firewalls: Defending Your Home Network from Attack


Some people deliberately work at the task of destroying computers, and they perform their dirty deeds by installing viruses on your computer. Other nasty folks invade your computer while you're on the Internet, and they get private information from your files (or leave viruses on your computer).

Fortunately, you can protect your network from these Internet hackers by purchasing and installing a firewall. A firewall is a program that protects computers from users on other networks (remember, the Internet is another network). In fact, a firewall can protect computers from other computers, but if you have a network, you don't want to isolate your computer from the other computers on your network.

Windows XP comes with a built-in firewall, but if you have a home network, you can't use the Windows XP firewall unless you've installed the service pack SP2. (More on that shortly.)
What a firewall does

The firewall blocks communication in both directions - to and from the Internet. A firewall works by watching everything that happens on your computer that has anything to do with activity outside your computer. Unless you say that it's okay, no action can occur between your computer and another computer. That other computer could be on the Internet or on your network.

Because the firewall stops any computer from accessing your computer, you must configure the firewall software to accept communications between your computer and the other computers on your network. Doing so frees the firewall to concentrate on communications between your computer and a computer on the Internet.

Any computer that tries to access your computer is either stopped dead in its tracks or is stopped temporarily until you tell the firewall whether to let the computer gain access (depending on the way you configure the firewall's behavior).

Computers send and receive data via ports. When an intruder attempts to reach your IP address, it's really your communication ports that are being examined. In addition to the visible ports, such as your USB, your computer contains thousands of virtual ports. You can't see a virtual port because it's a software service rather than a physical connector. However, as does a physical port, a virtual port accepts and sends data.
Examining a firewall's log file

After you install a firewall program on your network, open your firewall's log file (a list of all the attempts made to access your computer) and look at the information (a command exists on the menu bar of the firewall software to accomplish this). All the computers that have tried to get into your computer are listed by their IP addresses. Go to one of the Web sites that provides reverse lookups; these sites allow you to enter an IP address, and they return the name of the offending computer.

Sometimes the IP address belongs to an Internet service provider (ISP), and it's part of a range of addresses that are assigned to that ISP. This means that a customer of that ISP, who has been assigned that IP address for his or her Internet session, is trying to get into your computer. You probably won't be able to determine the identity of the customer. However, you can notify the ISP that at a certain time on a certain date, this particular IP address was trying to break in to your computer, and the ISP can determine to whom the address was assigned at that moment. Ask the ISP to let you know what it does to resolve the problem.

You can't tell whether a snooper was trying to do some damage, either by leaving behind a virus or stealing personal information. You can only tell that the snooper has tried to hack into your computer.
Hardware firewalls in routers

If you're sharing an Internet connection, and you're using a cable or DSL modem, the easiest, most efficient, and most powerful way to share the connection is to install a router.

You can buy routers that have built-in firewalls. The firewall-enabled router sits between your modem and the rest of your network, separating the Internet and your network into two independent, unconnected networks (sort of like two armed camps). The only device that's seen from the Internet is the router, which has a firewall. All the computers on the network are invisible to the Internet.

Several router manufacturers offer routers with firewall protection, and the equipment is available with a wide variety of options. Here are some of the manufacturers who offer hardware firewall devices:

* Linksys.com

* D-Link.com

* Belkin.com

* NetGear.com

Using firewalls with Windows XP

If you've installed a software firewall, or you're using the Windows XP SP2 firewall, you'll have to disable a router's firewall. This is one case in which "the more the merrier" doesn't work.

If you haven't installed Service Pack 2 (SP2) for Windows XP, turn off the Windows XP Internet Connection Firewall (ICF) and either install a software firewall program or use a router with a firewall feature, as discussed previously. To turn off ICF, follow these steps:

1. Choose Start --> Control Panel --> Network and Internet Connections --> Network Connections.

The Network Connections folder opens, displaying an icon or listing for your Internet connection(s).

2. Right-click the Local Area Network Connection, and choose Properties.

The Properties dialog box for your connection opens.

3. Click the Advanced tab, and deselect the option to use ICF.


Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:21 am

Firewalls: Defending Your Home Network from Attack


Some people deliberately work at the task of destroying computers, and they perform their dirty deeds by installing viruses on your computer. Other nasty folks invade your computer while you're on the Internet, and they get private information from your files (or leave viruses on your computer).

Fortunately, you can protect your network from these Internet hackers by purchasing and installing a firewall. A firewall is a program that protects computers from users on other networks (remember, the Internet is another network). In fact, a firewall can protect computers from other computers, but if you have a network, you don't want to isolate your computer from the other computers on your network.

Windows XP comes with a built-in firewall, but if you have a home network, you can't use the Windows XP firewall unless you've installed the service pack SP2. (More on that shortly.)
What a firewall does

The firewall blocks communication in both directions - to and from the Internet. A firewall works by watching everything that happens on your computer that has anything to do with activity outside your computer. Unless you say that it's okay, no action can occur between your computer and another computer. That other computer could be on the Internet or on your network.

Because the firewall stops any computer from accessing your computer, you must configure the firewall software to accept communications between your computer and the other computers on your network. Doing so frees the firewall to concentrate on communications between your computer and a computer on the Internet.

Any computer that tries to access your computer is either stopped dead in its tracks or is stopped temporarily until you tell the firewall whether to let the computer gain access (depending on the way you configure the firewall's behavior).

Computers send and receive data via ports. When an intruder attempts to reach your IP address, it's really your communication ports that are being examined. In addition to the visible ports, such as your USB, your computer contains thousands of virtual ports. You can't see a virtual port because it's a software service rather than a physical connector. However, as does a physical port, a virtual port accepts and sends data.
Examining a firewall's log file

After you install a firewall program on your network, open your firewall's log file (a list of all the attempts made to access your computer) and look at the information (a command exists on the menu bar of the firewall software to accomplish this). All the computers that have tried to get into your computer are listed by their IP addresses. Go to one of the Web sites that provides reverse lookups; these sites allow you to enter an IP address, and they return the name of the offending computer.

Sometimes the IP address belongs to an Internet service provider (ISP), and it's part of a range of addresses that are assigned to that ISP. This means that a customer of that ISP, who has been assigned that IP address for his or her Internet session, is trying to get into your computer. You probably won't be able to determine the identity of the customer. However, you can notify the ISP that at a certain time on a certain date, this particular IP address was trying to break in to your computer, and the ISP can determine to whom the address was assigned at that moment. Ask the ISP to let you know what it does to resolve the problem.

You can't tell whether a snooper was trying to do some damage, either by leaving behind a virus or stealing personal information. You can only tell that the snooper has tried to hack into your computer.
Hardware firewalls in routers

If you're sharing an Internet connection, and you're using a cable or DSL modem, the easiest, most efficient, and most powerful way to share the connection is to install a router.

You can buy routers that have built-in firewalls. The firewall-enabled router sits between your modem and the rest of your network, separating the Internet and your network into two independent, unconnected networks (sort of like two armed camps). The only device that's seen from the Internet is the router, which has a firewall. All the computers on the network are invisible to the Internet.

Several router manufacturers offer routers with firewall protection, and the equipment is available with a wide variety of options. Here are some of the manufacturers who offer hardware firewall devices:

* Linksys.com

* D-Link.com

* Belkin.com

* NetGear.com

Using firewalls with Windows XP

If you've installed a software firewall, or you're using the Windows XP SP2 firewall, you'll have to disable a router's firewall. This is one case in which "the more the merrier" doesn't work.

If you haven't installed Service Pack 2 (SP2) for Windows XP, turn off the Windows XP Internet Connection Firewall (ICF) and either install a software firewall program or use a router with a firewall feature, as discussed previously. To turn off ICF, follow these steps:

1. Choose Start --> Control Panel --> Network and Internet Connections --> Network Connections.

The Network Connections folder opens, displaying an icon or listing for your Internet connection(s).

2. Right-click the Local Area Network Connection, and choose Properties.

The Properties dialog box for your connection opens.

3. Click the Advanced tab, and deselect the option to use ICF.


Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:21 am

2010: D-day for the Internet as it hits "full capacity"?

Doom-filled warnings arrive from AT&T this week. The company says that without substantial investment in network infrastructure, the Internet will essentially run out of bandwidth in just two short years.

Blame broadband, says AT&T. Decades of dealing with the trickle of bandwidth consumed by voice and dialup modems left AT&T twiddling its thumbs. The massive rise of DSL and cable modem service in the 2000s has had AT&T facing a monstrous increase in the volume of data transmissions. And that's set to increase another 50 times between now and 2015. That's enough, says AT&T, to all but crash the system.

In response, AT&T says it's investing $19 billion to upgrade the backbone of the Internet, the routers, servers, and connections where the bulk of traffic is processed.

Of course, AT&T is using this breathlessness in part to point fingers beyond simple broadband use. Web video (especially high-definition video) is the most commonly mentioned bandwidth hog. AT&T says video alone will eat up 80 percent of traffic in two years vs. just 30 percent now. One wonders how YouTube doesn't collapse under the pressure. Hmmm.

Meanwhile, many are wondering whether this is prelude to AT&T announcing (or not announcing, but doing anyway) a traffic prioritization/shaping system like Comcast has been tinkering with... and which has earned it nothing but scorn. Net neutrality (which would forbid premium pricing for certain Internet applications and destinations) is a topic that continues to be hotly debated on Capitol Hill, and telcos are anxious to kill the idea since they'd love to be able to charge additional money for different kinds of web traffic. If the whole Internet is about to crash, well, that makes AT&T's argument all the more compelling, doesn't it?

source : yahoo.com

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:18 am

2010: D-day for the Internet as it hits "full capacity"?

Doom-filled warnings arrive from AT&T this week. The company says that without substantial investment in network infrastructure, the Internet will essentially run out of bandwidth in just two short years.

Blame broadband, says AT&T. Decades of dealing with the trickle of bandwidth consumed by voice and dialup modems left AT&T twiddling its thumbs. The massive rise of DSL and cable modem service in the 2000s has had AT&T facing a monstrous increase in the volume of data transmissions. And that's set to increase another 50 times between now and 2015. That's enough, says AT&T, to all but crash the system.

In response, AT&T says it's investing $19 billion to upgrade the backbone of the Internet, the routers, servers, and connections where the bulk of traffic is processed.

Of course, AT&T is using this breathlessness in part to point fingers beyond simple broadband use. Web video (especially high-definition video) is the most commonly mentioned bandwidth hog. AT&T says video alone will eat up 80 percent of traffic in two years vs. just 30 percent now. One wonders how YouTube doesn't collapse under the pressure. Hmmm.

Meanwhile, many are wondering whether this is prelude to AT&T announcing (or not announcing, but doing anyway) a traffic prioritization/shaping system like Comcast has been tinkering with... and which has earned it nothing but scorn. Net neutrality (which would forbid premium pricing for certain Internet applications and destinations) is a topic that continues to be hotly debated on Capitol Hill, and telcos are anxious to kill the idea since they'd love to be able to charge additional money for different kinds of web traffic. If the whole Internet is about to crash, well, that makes AT&T's argument all the more compelling, doesn't it?

source : yahoo.com

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:18 am

Tricks and Tips for Using Your Network Printer


Adapted From: Home Networking for Dummies:
The printing processes in Windows run smoothly and automatically most of the time, even across a network. However, knowing a few tricks makes network printing easier for all the users on your network.
Using a printer shortcut on the desktop

Sometimes you just need a printed copy of an existing document and you don't want to open the software, open the document, and use the commands that are required to print the document. If you put a shortcut to the printer on your desktop, you can drag documents to the shortcut icon to print them effortlessly. Follow these steps to create a printer shortcut on your desktop:

1. Choose Start --> Settings --> Printers.

The Printers folder opens.

2. Right-drag the printer icon to the desktop.

When you release the right mouse button, a shortcut menu appears.

3. Choose Create Shortcut(s) Here from the shortcut menu.

A printer shortcut appears on your desktop.

Using the printer shortcut is easy and timesaving. You can use it whenever you have any folder or window open (such as Windows Explorer, My Computer, or My Documents) that contains document files. Just drag a document file to the printer shortcut on the desktop. That's all you have to do - Windows does the rest.

Using separator pages to identify users

If everyone in your household uses the printers, you are likely to experience a lot of printer traffic. It's less messy if each job comes out of the printer with a form that displays the name of the owner. Luckily, such a form exists in Windows, and it's called a separator page. A separator page (sometimes called a banner) automatically prints ahead of the first page of each document.
Adding separator pages in Windows 95, 98, and Me

For a Windows 95, Windows 98, or Windows Me print server, go to the computer that has the printer attached to turn on separator pages using these steps:

1. Choose Start --> Settings --> Printers.

The Printers folder opens.

2. Right-click the appropriate printer icon and choose Properties from the shortcut menu that appears.

The printer Properties dialog box opens, with the General tab in the foreground.

3. Click the arrow to the right of the Separator page list box and choose a Separator page type.

The Separator page choices are None, Full, and Simple. Both the Full and Simple separator pages contain the document name, the user name, and the date and time that the document was printed. The Full option uses large, bold type, whereas Simple uses the Courier typeface that's built into the printer.

4. Click OK.
Adding separator pages in Windows 2000 and Windows XP

If you have a Windows 2000 Professional print server, follow Steps 1 and 2 in the previous section "Adding separator pages in Windows 95, 98, and Me," and then follow these steps:

1. Click the Advanced tab.

2. Click the Separator Page button.

The Separator Page dialog box appears.

3. Click Browse to select a separator file.

Separator files have the .sep extension. Choose Sysprint.sep for PostScript printers or Pcl.sep for non-PostScript printers.

4. Click OK twice to close the dialog box.
Troubleshooting network printing

Sometimes when you're printing to a remote printer, you see an error message indicating that there was a problem printing to the port. (The port is the path to the remote computer that has the printer attached.) Before you panic, check the condition of all the hardware.
Check the print server

Computers that have printers attached (called print servers) have to be turned on if you want to print from a remote computer. If the computer is turned off, turn it on.

It doesn't matter whether you know the logon password for the user name that appears during the logon process; nobody has to be logged on to a computer to use its shared printer. The Windows operating system on that computer simply must be started.
Check the printer

Make sure that the printer is turned on. Check any buttons, indicator lights, or message windows that may be trying to tell you that something is amiss. When the printer's "ready" light isn't on, the most common problems are that the printer is out of paper, a paper jam has occurred, or the cartridge is out of toner (or ink).
Check the network cable

If the computer is on and the printer is fine, check the network cable. A cable that isn't connected properly can't send data.
Check the Windows XP SP2 Firewall

If a shared printer is on a computer running Windows XP SP2, make sure that the firewall is configured to allow access to the printer by remote computers. Use the following steps to view or change the firewall's settings:

1. Open the Properties dialog box for the network adapter.

2. Click the Advanced tab.

3. Click the Settings button.

4. Click the Exceptions tab.

5. Be sure a check mark appears in the File and Printer Sharing option.


Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:12 am

Tricks and Tips for Using Your Network Printer


Adapted From: Home Networking for Dummies:
The printing processes in Windows run smoothly and automatically most of the time, even across a network. However, knowing a few tricks makes network printing easier for all the users on your network.
Using a printer shortcut on the desktop

Sometimes you just need a printed copy of an existing document and you don't want to open the software, open the document, and use the commands that are required to print the document. If you put a shortcut to the printer on your desktop, you can drag documents to the shortcut icon to print them effortlessly. Follow these steps to create a printer shortcut on your desktop:

1. Choose Start --> Settings --> Printers.

The Printers folder opens.

2. Right-drag the printer icon to the desktop.

When you release the right mouse button, a shortcut menu appears.

3. Choose Create Shortcut(s) Here from the shortcut menu.

A printer shortcut appears on your desktop.

Using the printer shortcut is easy and timesaving. You can use it whenever you have any folder or window open (such as Windows Explorer, My Computer, or My Documents) that contains document files. Just drag a document file to the printer shortcut on the desktop. That's all you have to do - Windows does the rest.

Using separator pages to identify users

If everyone in your household uses the printers, you are likely to experience a lot of printer traffic. It's less messy if each job comes out of the printer with a form that displays the name of the owner. Luckily, such a form exists in Windows, and it's called a separator page. A separator page (sometimes called a banner) automatically prints ahead of the first page of each document.
Adding separator pages in Windows 95, 98, and Me

For a Windows 95, Windows 98, or Windows Me print server, go to the computer that has the printer attached to turn on separator pages using these steps:

1. Choose Start --> Settings --> Printers.

The Printers folder opens.

2. Right-click the appropriate printer icon and choose Properties from the shortcut menu that appears.

The printer Properties dialog box opens, with the General tab in the foreground.

3. Click the arrow to the right of the Separator page list box and choose a Separator page type.

The Separator page choices are None, Full, and Simple. Both the Full and Simple separator pages contain the document name, the user name, and the date and time that the document was printed. The Full option uses large, bold type, whereas Simple uses the Courier typeface that's built into the printer.

4. Click OK.
Adding separator pages in Windows 2000 and Windows XP

If you have a Windows 2000 Professional print server, follow Steps 1 and 2 in the previous section "Adding separator pages in Windows 95, 98, and Me," and then follow these steps:

1. Click the Advanced tab.

2. Click the Separator Page button.

The Separator Page dialog box appears.

3. Click Browse to select a separator file.

Separator files have the .sep extension. Choose Sysprint.sep for PostScript printers or Pcl.sep for non-PostScript printers.

4. Click OK twice to close the dialog box.
Troubleshooting network printing

Sometimes when you're printing to a remote printer, you see an error message indicating that there was a problem printing to the port. (The port is the path to the remote computer that has the printer attached.) Before you panic, check the condition of all the hardware.
Check the print server

Computers that have printers attached (called print servers) have to be turned on if you want to print from a remote computer. If the computer is turned off, turn it on.

It doesn't matter whether you know the logon password for the user name that appears during the logon process; nobody has to be logged on to a computer to use its shared printer. The Windows operating system on that computer simply must be started.
Check the printer

Make sure that the printer is turned on. Check any buttons, indicator lights, or message windows that may be trying to tell you that something is amiss. When the printer's "ready" light isn't on, the most common problems are that the printer is out of paper, a paper jam has occurred, or the cartridge is out of toner (or ink).
Check the network cable

If the computer is on and the printer is fine, check the network cable. A cable that isn't connected properly can't send data.
Check the Windows XP SP2 Firewall

If a shared printer is on a computer running Windows XP SP2, make sure that the firewall is configured to allow access to the printer by remote computers. Use the following steps to view or change the firewall's settings:

1. Open the Properties dialog box for the network adapter.

2. Click the Advanced tab.

3. Click the Settings button.

4. Click the Exceptions tab.

5. Be sure a check mark appears in the File and Printer Sharing option.


Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:12 am

What's Microsoft's Move After Yahoo's Rebuff?

Now that Microsoft Corp. has walked away from its takeover bid for Yahoo Inc., the tech world is turning its focus on the Redmond, Wash. giant's next move. And for some analysts, Microsoft may still be in good shape to cut into Google's online search and advertising stranglehold without Yahoo's help.

Three months ago, Microsoft expressed its desire to stay relevant in the online market with its US $44.6 billion bid for the Web's second biggest search engine. Microsoft sits a distant third to Google Inc. in online search and also lags behind the Mountain View, Calif.-based search empire in attracting advertisers for paid search ads. But with the Yahoo sweepstakes now over (at least for now), some analysts are saying that if Microsoft can refocus on its own online efforts, it can challenge for online supremacy.
Playing to Strengths

"The problem with going after only a search business is you're fighting Google's game," Charlene Li, vice-president and principal analyst at Forrester Research Inc., said. "What Microsoft needs to do is redefine the game."

To accomplish this task, she argues, Microsoft must to stick with its current online advertising strategies, which includes continuing to integrate its recently purchased advertising network aQuantive into its services. Li said the fact that Microsoft has such a large user base with MSN and its other communication properties, gives it a good starting point to differentiate itself from Google.

"One of the promising things Microsoft has done recently is open up the address book in Hotmail, so users can integrate their contacts into Facebook, without giving up their username and password," she said. "Over the past three months, while Microsoft has been occupied, they haven't been as focused on the competition and on innovations like these."

And while nobody is debating the difficult battle Microsoft will face in trying to catch up with Google's search, some analysts see the software giant a lot closer than previously thought in the online advertising market. Matt Rosoff, analyst at Kirkland, Wash.-based Directions on Microsoft, said Microsoft will continue to pursue the ad deals it's created with companies like Facebook, in addition to possibly striking a side deal with Yahoo as well.

"I don't think Microsoft would be against striking some sort of advertising partnership with Yahoo," he said. "That's probably what it really wanted all along and the acquisition was one way to do that and to get some other benefits at the same time. But if it could get the advertising platform on Yahoo search, Microsoft would probably be very happy with that."
Other Allies in the Offing?

Another rumor in the aftermath of the failed Yahoo deal is that Microsoft might be interested in AOL. Platform A, AOL's online advertising network, is the largest in the U.S., and there has been heavy speculation that Time Warner Inc. is considering spawning off the AOL division as its own entity. According to Rosoff, Beijing-based search giant Baidu -- which he said holds about 10 per cent of the search market -- could also be a possibility for Microsoft.

As for Microsoft's enterprise strategy, Forrester principal analyst Rob Koplowitz said he was interested in seeing how Yahoo's expertise in creating large data centers and highly scalable applications would have translated over to Microsoft. But despite this, he said, Microsoft's recent software-as-a-service (SaaS) focus and data center plans will still be in good shape without the merger.

"I just think Microsoft plans to do this on its own now," Koplowitz said. "It's already announced SaaS for Exchange and for SharePoint, and it's pretty well articulated what its data center plans are going to be, so they don't need an acquisition to get where they want to go. In terms of its enterprise business, I think Microsoft will just keep steaming along."

But for as long and drawn out as this takeover bid has been, Rosoff said, there's always a chance Microsoft reconsiders and eventually comes back to the table.

"It all depends on how things evolved over the next three to six months," he said. "If Yahoo continues to report quarterly earnings that aren't particularly good and shareholders get angry and replace the current board and executive leadership, Microsoft could come back."
source : pcworld.com

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:09 am

Sun Offers Peak at Internet Apps Plan

Sun Microsystems Inc. is taking a different approach, compared to its rivals, toward offering a rich Internet applications platform geared for the designer.

Web designers can currently use tools like Microsoft Expression and Adobe Creative Suite, but Sun said it will also offer a designer tool, albeit in an approach that's phased and reflects a "different strength", said Param Singh, senior director of JavaFX at Sun. "

Sun's approach, said Singh, is to first start with delivering tools so the developer can continue building in a familiar environment, like an Integrated Developer Environment (IDE), and yet be able to integrate content from the designer counterpart. "We want to empower our current audience today, extend that, and then continue to work towards that," Singh said at a media roundtable at the JavaOne conference.

However, when pressed for a timeline, Singh said the road map will come later and that "we are just saying we understand the requirements of the designer."

Sun is coming "from a different point in the spectrum" compared to Microsoft and Adobe with its incremental approach and strong developer focus, he said, adding that "different vendors have different strengths in different areas."

Singh noted that while its RIA rivals have strengths on the design side, "what their problem is, is really getting it to work with developers."

In fact, he doesn't believe there is a client platform that covers the full spectrum from graphic designer to rich content creator to scripter to developer. "Whoever delivers that overall experience will be a platform that people will adopt. So that's our vision."

Singh isn't concerned that designers might have their own set of familiar and comfortable tools and environments at the potential expense of the adoption of the JavaFX platform. The market trend, he explained, is such that traditionally-segregated sides want to collaborate and "Java developers want to work with designers and designers want the backend services accessible to them."

Calgary, Alta-based ICEsoft Technologies Inc., a provider of Java-based Web development software for enterprises, was an exhibitor at the conference pavilion. The company's senior software architect, Ted Goddard, said Sun's vision of an end-to-end platform for all aspects of RIA development sounds like a good thing, but he does caution that developers and designers tend to work on very different things.

"In one case, the developers are mostly concerned with the logic of the application and designers are concerned with how it looks. And conceptually, those are really different," said Goddard.

The important thing, he added, is to create an environment where all parties can work on their respective areas "without stepping on each others toes and being stretched out of their comfort region."
Sun's Philosophy

Goddard said that the Java platform already does offer technologies that provide a clean separation between developer and designer tasks. JavaServer Faces, for instance, lets the developer work on the model in JavaBeans and the designer work on the markup with a tool like Adobe Dreamweaver. And although Dreamweaver is an Adobe tool, he said the setup nonetheless let's people use familiar platforms and "everyone is ultimately working on a Java application making it an even more powerful team."

Designers perhaps need to be better aware of capabilities within the Java community system, said Goddard, adding that many of them are probably focused on the PHP scripting language, for instance, because it's "similar to what they've already been doing and they know other designers who are using PHP."

On the fact that Singh had no roadmap to share, Goddard said he thinks Sun will lend an ear to users and eventually develop tools that are useful for them.

In fact, he thinks the Java language is much better for building RIAs given the solid base. All that's really required for better collaboration, he said, is to incorporate the multimedia capabilities that already exist with certain Java tools. "It's really a matter of integrating those existing multimedia technologies on top of this really strong Java base."
source : pcworld.com

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:06 am

Gaming: Far from a Solo Gig

Last week a brand-new video game, Grand Theft Auto IV, racked up US$500 million in sales -- in one week.

Last year online gaming attracted 28 percent of the total worldwide online population -- almost 217 million people.

This isn't just fun and games. This is big business.
Play With Others

Meanwhile, another major trend is sweeping the online world. Social networks have grown enormously, as this map shows (it's in French, but you should get the point). These networks have added a new element to online games -- a social aspect. Social gaming combines games and social networking to allow you to involve your friends in your games. This may be as simple as comparing scores or issuing challenges, or as complex as real-time multiplayer gaming.

The types of games can be unexpected. The most popular game on Facebook is Scrabulous, an unlicensed version of the board game Scrabble. Scrabulous became so popular that it caught the attention of Mattel and Hasbro, which own the rights to the game. They wanted to shut it down, despite that fact the Scrabulous had probably introduced Scrabble to a completely new demographic.

Social games might be multiplayer games that you can play with friends on your favorite social network. But some companies are looking to those free casual games as being a core component of something bigger -- and a revenue-generating business, too. Companies like Mytopia and J2Play are building communities around the games, and spanning multiple social networks, which means that you can play games or issue challenges to your friends across different networks. And in a world of applications that grows more crowded every day, it provides an opportunity to discover new games.

Other Up and Comers:

Mytopia, based in Silicon Valley and Israel, has released eight games across Facebook, Bebo, and MySpace, as well as Web and desktop widgets. The games allow players to join teams, send instant messages, collect points, virtual currency, and trade in-game items. Mytopia is considering sponsorships, premium subscriptions, and other methods of revenue generation. They expect to open their platform to developers this month.

J2Play (Disclosure: I have done consulting work with J2Play) has taken a somewhat different tack. Rather than host the games, it provides a platform for developers of existing games to add community-based features to their games, including collecting credits and badges, issuing challenges and chat features, as well as showing what games your friends are playing and allowing you to invite them to the game. A simple tool allows you to enable your game for Facebook, Bebo, MySpace, Hi5, and Orkut, in less than five minutes. They plan to extend this to PC and mobile games as well. Revenue models include advertising, micro-transactions, and potential upselling of non-web-based games.

Other companies in the social gaming space include Social Gaming Network and Zynga. The market has even spawned its own conference -- Social Gaming Summit -- focused on increasing social interaction within games.

The uptake of environments such as Second Life, as well as both social networks and online gaming, shows that there is a large group of people with a desire to connect online with others, and plenty of disposable income to spend. Smart companies can capitalize on this growing group by providing a place to discover, connect, and play. Along with a little friction-free commerce.

Update: Just after publishing this, I learned that Shawn Fanning, of Napster fame, has sold his social gaming network startup Rupture to Electronic Arts for $30 million. This market is obviously being taken pretty seriously already.

Larry Borsato has been a software developer, marketer, consultant, public speaker, and entrepreneur, among other things. For more of his unpredictable, yet often entertaining thoughts you can read his blog at larryborsato.com.
source : pcworld.com

Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 5:01 am

Tuesday, 6 May 2008

Kang Rohman

Saya banyak belajar blog dari kang rohman,... banyak ide2 yang bagus di dapet dari blog kang rohman itu. ga ada salahnya untuk bagi kaum yang masih awal2 dalam pembuatan blog. untuk yang mau belajar jangan takut salah dech..
Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:51 pm

Template Baru

Wuih dari kemaren bilang terus punya template baru.....
jangan lupa kunjungi blog saya yang lainnya ya...:
1. Worlds Technology
2. Sofware Free All
3. Hot News Weekly
4. rajasaads
Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 12:51 am

Monday, 5 May 2008

Ganti Template

Ye.... Ketemu lagi, gimana template baru saya.... Meski dapet gratisan tapi limayan bagus kan... tadinya sempet ga mau ganti template, tapi pas liat template ini ko jadi tertarik...
Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 4:26 am

Tuesday, 29 April 2008

Launching rajasaads.blogspot.com

Pengumuman,...
Saya informasikan bahwa ada blog bagus yaitu rajasaads . Coba dech buka....
Sebenernya blognya udah agak lama di buatnya, cuma baru di kasih tau aja...
Kunjungi blog saya itu ya....
Tunggu blog saya berikutnya.
Share/Save/Bookmark
Posted by: aroeltsm aroeltsm.blogspot.com, Updated at: 11:04 pm

Post Populer